Hardening Apache with Mod

What is ModSecurity?

ModSecurity is a free and open-source web application that started out as an Apache module and grew to a fully-fledged web application firewall. It works by inspecting requests sent to the web server in real-time against a predefined rule set, preventing typical web application attacks like XSS and SQL Injection.

Prerequisites & Requirements

In order to install and configure ModSecurity, you need to have a Linux server with the following services running:

Apache 2

Note
This demonstration has been performed on Ubuntu 18.04. However, all techniques demonstrated are distribution agnostic with the exception of package names and package managers.

Installing ModSecurity

ModSecurity can be installed by running the following command in your terminal:
```
sudo apt install libapache2-mod-security2 -y
```
Alternatively, you can also build ModSecurity manually by cloning the official ModSecurity Github repository.
After installing ModSecurity, enable the Apache 2 headers module by running the following command:
```
sudo a2enmod headers
```

After installing ModSecurity and enabling the header module, you need to restart the apache2 service, this can be done by running the following command:

    sudo systemctl restart apache2

You should now have ModSecurity installed. The next steps involve enabling and configuring ModSecurity and the OWASP-CRS.

Configuring ModSecurity

ModSecurity is a firewall and therefore requires rules to function. This section shows you how to implement the OWASP Core Rule Set. First, you must prepare the ModSecurity configuration file.

Remove the .recommended extension from the ModSecurity configuration file name with the following command:
```
 sudo cp /etc/modsecurity/modsecurity.conf-recommended /etc/modsecurity/modsecurity.conf
```

With a text editor such as vim, open /etc/modsecurity/modsecurity.conf and change the value for SecRuleEngine to On:

File: /etc/modsecurity/modsecurity.conf

1
2
3
4
5
6
7
8
9



# -- Rule engine initialization ----------------------------------------------

# Enable ModSecurity, attaching it to every transaction. Use detection
# only to start with, because that minimises the chances of post-installation
# disruption.
#
SecRuleEngine On
...
    

Restart Apache to apply the changes:
```
sudo systemctl restart apache2
```

ModSecurity should now be configured to run. The next step in the process is to set up a rule set to actively prevent your web server from attacks.

Setting Up the OWASP ModSecurity Core Rule Set

The OWASP ModSecurity Core Rule Set (CRS) is a set of generic attack detection rules for use with ModSecurity or compatible web application firewalls. The CRS aims to protect web applications from a wide range of attacks, including the OWASP Top Ten, with a minimum of false alerts. The CRS provides protection against many common attack categories, including SQL Injection, Cross Site Scripting, and Local File Inclusion.

To set up the OWASP-CRS, follow the procedures outlined below.

First, delete the current rule set that comes prepackaged with ModSecurity by running the following command:
```
sudo rm -rf /usr/share/modsecurity-crs
```
Ensure that git is installed:
```
sudo apt install git
```

Clone the OWASP-CRS GitHub repository into the /usr/share/modsecurity-crs directory:

sudo git clone https://github.com/coreruleset/coreruleset /usr/share/modsecurity-crs

Rename the crs-setup.conf.example to crs-setup.conf:

sudo mv /usr/share/modsecurity-crs/crs-setup.conf.example /usr/share/modsecurity-crs/crs-setup.conf

Rename the default request exclusion rule file:

sudo mv /usr/share/modsecurity-crs/rules/REQUEST-900-EXCLUSION-RULES-BEFORE-CRS.conf.example /usr/share/modsecurity-crs/rules/REQUEST-900-EXCLUSION-RULES-BEFORE-CRS.conf

You should now have the OWASP-CRS setup and ready to be used in your Apache configuration.

Enabling ModSecurity in Apache 2

To begin using ModSecurity, enable it in the Apache configuration file by following the steps outlined below:

Using a text editor such as vim, edit the /etc/apache2/mods-available/security2.conf file to include the OWASP-CRS files you have downloaded:

File: /etc/apache2/mods-available/security2.conf

1
2
3
4
5
6



<IfModule security2_module>
        SecDataDir /var/cache/modsecurity
        Include /usr/share/modsecurity-crs/crs-setup.conf
        Include /usr/share/modsecurity-crs/rules/*.conf
</IfModule>
    

In /etc/apache2/sites-enabled/000-default.conf file VirtualHost block, include the SecRuleEngine directive set to On.

File: /etc/apache2/sites-enabled/000-default.conf

 1
 2
 3
 4
 5
 6
 7
 8
 9
10



<VirtualHost *:80>
        ServerAdmin webmaster@localhost
        DocumentRoot /var/www/html

        ErrorLog ${APACHE_LOG_DIR}/error.log
        CustomLog ${APACHE_LOG_DIR}/access.log combined

        SecRuleEngine On
</VirtualHost>
    

If you are running a website that uses SSL, add SecRuleEngine directive to that website’s configuration file as well.

Restart the apache2 service to apply the configuration:
```
sudo systemctl restart apache2
```

ModSecurity should now be configured and running to protect your web server from attacks. You can now perform a quick test to verify that ModSecurity is running.

Testing ModSecurity

Test ModSecurity by performing a simple local file inclusion attack by running the following command:

curl http://<SERVER-IP/DOMAIN>/index.php?exec=/bin/bash

If ModSecurity has been configured correctly and is actively blocking attacks, an error page will be displayed.

Suggested knowledgebase articles:

Hardening Apache with Mod_Security

What is ModSecurity?

Prerequisites & Requirements

Installing ModSecurity

Configuring ModSecurity

Setting Up the OWASP ModSecurity Core Rule Set

Enabling ModSecurity in Apache 2

Testing ModSecurity

Article Details